How to replace brake shoes

The replacement method of the brake shoe is as follows:

1. When replacing, the brake pads provided by the original spare parts should be replaced. Only in this way can the braking effect between the brake pads and the brake disc be the best and the wear and tear should be minimized;

2. When replacing the brake shoes, special tools must be used to push the brake cylinder back. Do not use other crowbars to press back hard, which will easily cause the guide screw of the brake caliper to bend and cause the brake pad to be stuck;

3. After replacing the brake shoe, it is necessary to step on the brake several times to eliminate the gap between the shoe and the brake disc, resulting in no brake on the first foot, which is prone to accidents;

4. After the brake shoe is replaced, it needs to run in for 200 kilometers to achieve the best braking effect. The newly replaced shoe must be driven carefully.